THE PADDLE REGISTER · 2024 · LIMITED RUN

Ronbus Ripple R1.14 / R2.14 (beta)

The first widely played non-honeycomb core: an elastomer/EVA block that Zane Navratil described as having rocket-like power. It shipped only as a members' beta, then stalled for months when production units exceeded USAP's new PBCoR ceiling, becoming the test case for the Nov 2024 standard. It previewed the full-foam Gen 4 wave of 2025.

List price
$250 list (beta sold to Connect members)
Launched
Sep 20, 2024date known to the day
Build
Full foam (Gen 4)
Thickness
14mm
Shapes
Elongated (R1) · Widebody (R2)
Pro
Zane Navratil praised the beta's power in early testing (The Dink)
1216.5 in7.5 in5.5 in14 mm
Drawn to scale from the published dimensions. Left: the face. Right: cut away to the core. An original drawing, not a product photo.
USA PICKLEBALLNot on the list Sanctioned amateur play.
UPA-ANot confirmed here PPA Tour and MLP.
QUIET CATEGORYNot listed USAP's under-80 dB list for noise-restricted courts.
PATENTSNo patent action known Brand-level status, from the ITC case file and settlements.

Certification note. Beta R1.14 and R2.14 were added to USAP's approved list in Sept 2024. Production samples later failed PBCoR (above 0.44); USAP said all prior Ripple versions would be voluntarily removed effective July 1 2025, and the Ripple V2 later received PBCoR .43 approval. The beta page now reads 'Recreational play only'.

Status checked Sep 21, 2026. Lists change; confirm on the USAP and UPA-A lists before a tournament.

TIMELINE

  1. Aug 2024 APPROVAL Pickleball Studio (Aug 16 2024) notes the Ripple 14mm 'recently received USAP approval' while still in alpha testing. pickleballstudio.beehiiv.com ↗
  2. Sep 20, 2024 LAUNCH Ripple.R1.14 released to Connect members only as a beta; no pre-orders taken. ronbus.com ↗
  3. Sep 27, 2024 NEW VARIANT Ripple.R2.14 beta released to Connect members. ronbus.com ↗
  4. May 9, 2025 DELISTED USAP: beta met initial tests but production samples did not pass PBCoR; prior Ripple versions removed effective July 1 2025. usapickleball.org ↗

HOW IT IS BUILT

Ronbus's fourth-generation core: a patent-pending carbon-fiber-infused rebounding elastomer (FIRE), listed on the product page as 'Carbon Fiber Grid Infused EVA', replacing honeycomb entirely, under a raw Toray T700 face at 14mm.

  1. 1carbon fiber grid infused EVA / FIRE elastomer core (14mm)
  2. 2raw Toray T700 carbon fiber textured face
Face
Raw Toray T700 carbon fiber

Construction per ronbus.com ↗

Matt's Pickleball review pages rate-limited during research; measured swingweight not captured. The Dink reported a planned Dec 6 2024 production release that slipped.

1216 in nominal8 in5.25 in nom.14 mm
Beta Ripple R2.14

VARIANTS · PUBLISHED AND MEASURED NUMBERS

VariantShapeLength × widthHandleCoreWeightSwingweightTwistweightFrom
Beta Ripple R1.14 elongated 16.5 × 7.5 in 5.5 in 14 mm 7.9 oz ±0.4 oz ronbus.com ↗

Swingweight and twistweight are each lab's own measurement of its own sample. Unit-to-unit variance is normal.

MEASURED BY THE LABS

The register does not re-measure paddles or copy a lab's numbers wholesale. Power, pop and spin belong to the people with the radar guns; go read them.

FIELD REPORTS · AFTER YOU BUY IT

Reviewers measure a paddle new. Nobody measures it at hour sixty.

Loading field reports…

Keep a bag on Rally: log the hours you put on this paddle, when the grit fades, and when it goes dead. It stays on your device until you press "send a wear report", and the report carries no name.

Open the bag on Rally ↗ Compare with…

SOURCES · HIGH CONFIDENCE

Report a correction

Something on this page is wrong? Say which fact and paste the page that shows it. Corrections without a source are not accepted. Accepted ones show in the changes feed.

NEARBY IN THE REGISTER

the whole register · everything from Ronbus · the 2026 calendar · CC0