THE PADDLE REGISTER · 2024 · LIMITED RUN

Selkirk Project 007

Selkirk's late-2024 Labs release bet on durability (InfiniGrit) and thinness (10mm) rather than raw power, with a titanium mesh for stiffness. Pickleball Studio found it balanced and fast through the air; the paddle was later discounted heavily. It set up the InfiniGrit surface that Selkirk pushed across its 2025 line.

List price
$333
Launched
Oct 29, 2024date known to the day
Build
Polymer honeycomb
Thickness
10 / 14mm
Shapes
Elongated (Invikta) · Standard (Epic)
Pro
Catherine Parenteau (quoted in launch release)
Made in
Assembled in the USA
Warranty
2 years against manufacturer defects (original purchaser)
12316.4 in7.5 in5.5 in14 mm
Drawn to scale from the published dimensions. Left: the face. Right: cut away to the core. An original drawing, not a product photo.
USA PICKLEBALLApproved Sanctioned amateur play.
UPA-ANot confirmed here PPA Tour and MLP.
QUIET CATEGORYNot listed USAP's under-80 dB list for noise-restricted courts.
PATENTSNo patent action known Brand-level status, from the ITC case file and settlements.

Status checked Sep 21, 2026. Lists change; confirm on the USAP and UPA-A lists before a tournament.

TIMELINE

  1. Oct 29, 2024 LAUNCH Selkirk press release introduces LABS Project 007 at $333, available now. selkirk.com ↗

HOW IT IS BUILT

Polypropylene honeycomb core with a patent-pending titanium mesh layer between core and face sheets, Florek carbon fiber face with InfiniGrit surface (claimed 3x the durability of raw carbon), edgeless with an updated 'wing' aero throat; the 10mm is Selkirk's thinnest edgeless paddle.

  1. 1polypropylene honeycomb core (10 or 14mm)
  2. 2patent-pending titanium mesh layer
  3. 3Florek carbon fiber face with InfiniGrit
Face
Florek carbon fiber, InfiniGrit surface
Edge
edgeless (Aero-DuraEdge)

Construction per selkirk.com ↗

Selkirk page lists both a nominal (107 / 5.21) and an 'actual' measured value per variant; actual values used. Page currently shows a $130 sale price.

12315.9 in7.85 in5.25 in14 mm
Project 007 Epic 14mm

VARIANTS · PUBLISHED AND MEASURED NUMBERS

VariantShapeLength × widthHandleCoreWeightSwingweightTwistweightFrom
Project 007 Invikta 14mm elongated 16.4 × 7.5 in 5.5 in 14 mm 7.9–8.4 oz oz 111.8 6.53 selkirk.com ↗
Project 007 Invikta 10mm elongated 16.4 × 7.5 in 5.5 in 10 mm 7.7–8.1 oz oz 107.1 5.51 selkirk.com ↗
Project 007 Epic 14mm standard 15.9 × 7.85 in 5.25 in 14 mm 7.9–8.4 oz oz 106.9 6.53 selkirk.com ↗
Project 007 Epic 10mm standard 15.9 × 7.85 in 5.25 in 10 mm 7.7–8.1 oz oz 103.9 5.93 selkirk.com ↗

Swingweight and twistweight are each lab's own measurement of its own sample. Unit-to-unit variance is normal.

MEASURED BY THE LABS

The register does not re-measure paddles or copy a lab's numbers wholesale. Power, pop and spin belong to the people with the radar guns; go read them.

FIELD REPORTS · AFTER YOU BUY IT

Reviewers measure a paddle new. Nobody measures it at hour sixty.

Loading field reports…

Keep a bag on Rally: log the hours you put on this paddle, when the grit fades, and when it goes dead. It stays on your device until you press "send a wear report", and the report carries no name.

Open the bag on Rally ↗ Compare with…

SOURCES · HIGH CONFIDENCE

Report a correction

Something on this page is wrong? Say which fact and paste the page that shows it. Corrections without a source are not accepted. Accepted ones show in the changes feed.

NEARBY IN THE REGISTER

the whole register · everything from Selkirk · the 2026 calendar · CC0